Large Inclination Belt Conveyor

DJ large inclination belt conveyor is a new type of continuous conveying equipment, which has a large conveying capacity (1.5 to 2 times higher conveying capacity than other conveyors); strong versatility (basic parts are the same with those of universal belt type), wide range of application (suitable for conveying gravel, limestone, coal, sand, clay, sintering sand powder, wood chips, grain, etc.. which with a block size of not more than 550mm.)

1.DJ large inclination belt conveyor is a general-purpose continuous conveying material for bulk materials, which adopts the conveyor with corrugated sidewall and diaphragm. So it is especially suitable for large inclination conveying.

2.It can be used in industries such as coal, chemical, building materials, metallurgy, electric power, light industry, grain, port, etc.. And convey various bulk material with bulk specific weight of 0.5-2.5t/m3 within the scope of -15 °C ~ +40 °C of working environment humidity.

3.The large inclination belt conveyor can also set horizontal conveying sections of any length at unit head and unit tail for connection with other conveying equipment.

4.The conveying angle of belt conveyor with sidewall is 0°~90°.

DJ large inclination belt conveyor (sidewall belt conveyor) is constructed by attaching a freely stretchable rubber wave vertical "skirt" on both sides of the flat rubber conveyor belt, and there is a certain strength adhesion between the skirts, which and elasticity of the diaphragm form a squat bucket for the material is continuously conveyed in the bucket. DJ large inclination belt conveyor (sidewall belt conveyor) can be widely used in coal, grain, building materials, chemical, hydropower and metallurgy departments, and convey various bulk material with bulk specific weight of 0.5-2.5t/m3 within the scope of -15 °C ~ +40 °C of working environment humidity.

For materials with special requirements, such as high temperature, materials with acid, alkaline, oil or organic solvents, special sidewall conveyor belts are required.

1. It can convey bulk materials with large angle, which can save a lot of equipment floor space and completely solve the conveying angle that ordinary belt conveyor can't reach.

2. The mechanized belt conveyor conveys materials and the overall investment cost is low, saving about 20% to 30% of investment costs.

3. Compared with ordinary belt conveyors, bucket elevators and scraper conveyors, this machine has superior comprehensive technical performance.

4. The conveying capacity is large, up to 6000m3/h, and the vertical lifting height can reach 500m.

5. When conveying materials vertically, the material size can be up to 400mm.

6. Smooth transition from horizontal to oblique (or vertical).

7. Low energy consumption, simple structure and convenient maintenance.

8. The tape has high strength and long service life.

Belt width B(mm)		400		500		650		800
Height of sidewall (mm)		60	80	80	120	120	160	120	160	200	240
Capacity of partial angle Q3/h	30°	20	34	46	71	104	120	128	157	195	235
	45°	14	26	35	57	83	97	102	127	157	195
	60°	10	18	25	40	58	69	72	90	112	142
	90°	5	10	13	21	31	37	38	48	60	76
External dimensions	Center height of head wheel H2/h(MM)	350-100		1100-2000		1300-2000		1300-2000
	Center height of tail wheel H2/h(MM)	330-490		600		600		600-800
	Height of belt surface H2/h(MM)	500-700		760-800		800-850		800-1115
	Width of foot margin B2/h(MM)	580		870		1020		1220
Belt width B(mm)		1000					1200
Height of sidewall (mm)		120	160		200	240	160	200		240	300
Capacity of partial angle Q3/h	30°	172	216		267	327	275	331		419	466
	45°	137	175		216	271	222	267		347	384
	60°	96	124		153	197	158	190		253	178
	90°	51	66		83	106	85	102		136	149
External dimensions	Center height of head wheel H2/h(MM)	1400-2000							1600-2000
	Center height of tail wheel H2/h(MM)	600-800					800-1000
	Height of belt surface H2/h(MM)	800-1200					1050-1500
	Width of foot margin B2/h(MM)	1440					1690